Climaveneta | Commercial & Industrial Chiller | Air-Cooled Chillers

TECS2 0211 - 1154

High efficiency chiller, air source for outdoor installation
220 – 1324 kW

Outdoor unit for the production of chilled water featuring oil-free centrifugal compressor, with R134a, axial-flow fans, condensing coil with copper tubes and aluminium fins, shell and tube flooded evaporator and electronic regulation valve. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation together with the use of inverter technology. The compressor is radically innovative: magnetic bearings and digital rotor speed control allow partial load efficiency levels to be reached that were hither to impossible.

NECS 0202T - 0612T

Chiller, air source for outdoor installation
47,8 – 159 kW

Outdoor unit for the production of chilled water with hermetic rotary Scroll compressors, axialflow fans, shell and tubes exchanger and thermostatic expansion valve. External panels in Peraluman and structure in aluminium sections. The range is equipped with two compressors on two independent refrigerant circuits.

NX 0152P - 0812P

Chiller, air source for outdoor installation
39,2 – 227 kW

Outdoor unit for the production of chilled water with hermetic rotary Scroll compressors, ozone-friendly refrigerant R410A, axial-flow fans, plate heat exchanger, micro-channel full-aluminum air coils and thermostatic or electronic expansion valve, according to the model. The range is composed by units equipped with two compressors in a single-circuit configuration.

NECS-C 0152 - 1204

Chiller, air source for indoor installation
35,8 – 325 kW

Indoor unit for the production of chilled water with hermetic rotary Scroll compressors, centrifugal fans, braze-welded plate-type exchanger and thermal expansion valve. External panels in pre-clad sheet steel (simil Pereluman) and base in galvanised steel with paint finish. The range includes the single-circuit two-compressor versions and the dual circuit four-compressor versions.

NX 0614P - 1214P

Chiller, air source for outdoor installation
159 – 327 kW

Outdoor unit for the production of chilled water with hermetic rotary Scroll compressors, ozone-friendly refrigerant R410A, axial-flow fans, braze-welded plate-type heat exchanger, micro-channel full-aluminum air coils and thermostatic expansion valve. The range is composed by units equipped with four compressors in tandem configuration on two independent refrigeration circuits.

NX 0614T - 1214T

Chiller, air source for outdoor installation
159 – 352 kW

Outdoor unit for the production of chilled water with hermetic rotary Scroll compressors, ozone-friendly refrigerant R410A, axial-flow fans, shell and tubes heat exchanger, micro-channel full-aluminum air coils and thermostatic or electronic expansion valve, according to the model. The range is composed by units equipped with four compressors in tandem configuration on two independent refrigeration circuits.

FOCS60 /K 1542 - 1962

Air source chiller for outdoor installation – 60 Hz
290 – 382 kW

Outdoor unit (voltages available 460V, 380V or 230V) for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-fl ow fans, condensing coil with copper tubes and aluminium fins, shell and tubes evaporator and mechanical expansion valve. Structure with suitably-thick hot galvanised steel sheet base, painted with polyester powder coat, perimeter frame made from aluminium section bars. Aluminium alloy external casing and finish for complete resistance to the elements, designed to provide total accessibility to the inside components. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation. This unit has been designed to optimize the costs – performances ratio.

NECS-FC 0152-1604

Air cooled chiller with free-cooling
41,5 – 477 kW

Outdoor unit for the production of chilled water, equipped with hermetic scroll compressors, R410A refrigerant, axial-fans, condensing coil with copper tubes and aluminum fins, braze-welded plate evaporator and thermostatic expansion valve. External panels are of peraluman, base of galvanized epoxy powder coated steel. The unit is supplied with anti-freeze oil and refrigerant and has been factory tested. On-site installation therefore just involves making connections to the mains power and water supplies. These chillers, fitted with free-cooling coils, are used in IT-cooling, industrial and civil applications, when the cooling load is constant all-year-round or the outdoor air temperature is lower than the temperature of the liquid return line. In free cooling mode, the liquid is cooled by outdoor air, thus lowering the load of the compressors until it is reduced to zero. The NG configuration complies with applications where it is not allowed or desired the use of ethylene glycol.

FOCS60 /K 0751 - 2632

Air source chiller for outdoor installation – 60 Hz
148 – 509 kW

Outdoor unit (voltages available 460V, 380V or 230V) for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-fl ow fans, condensing coil with copper tubes and aluminium fins, plate evaporator and mechanical expansion valve (electronic on sizes 1021, 1301, 2432, 2632). Structure with suitably-thick hot galvanised steel sheet base, painted with polyester powder coat, perimeter frame made from aluminium section bars. Aluminium alloy external casing and finish for complete resistance to the elements, designed to provide total accessibility to the inside components. Flexible and reliable unit; it easily adapts it self to different thermal load conditions thanks to the precise thermoregulation. This unit has been designed to optimize the costs – performances ratio.

FOCS 0751 - 2632

Chiller, air source for outdoor installation
134 – 516 kW

Outdoor unit for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-flow fans, condensing coil with copper tubes and aluminium fins, plate evaporator and thermostatic expansion valve. Frame with base in polyester-painted thick hot-galvanised sheet steel and external panels in peraluman. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation. The high performance’s level is achieved thanks to the accurate sizing of all internal components.

FOCS 1542 - 2642

Chiller, air source for outdoor installation
252 – 516 kW

Outdoor unit for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-flow fans, condensing coil with copper tubes and aluminium fins, shell and tubes evaporator designed by Climaveneta and thermostatic expansion valve. Frame with base in polyester-painted thick hot-galvanised sheet steel and external panels in peraluman. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation. The high performance’s level is achieved thanks to the accurate sizing of all internal components.

NECS 1314 - 3218

Chiller, air source for outdoor installation
334 – 885 kW

Outdoor unit for the production of chilled water with hermetic rotary Scroll compressors, ozone-friendly refrigerant R410A, axial-flow fans, shell and tubes exchanger and electronic expansion valve. The range is composed by units equipped with four, six and eight compressors in multi-circuit configuration.

TECS2 HFO 0351 - 1053

High efficiency chiller, air source for outdoor installation
339 – 1017 kW

Outdoor unit for the production of chilled water featuring oil-free centrifugal compressor, with refrigerant HFO (1234-ze), axial-flow fans, condensing coil with copper tubes and aluminium fins, shell and tube flooded evaporator and electronic regulation valve. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation together with the use of inverter technology. The compressor is radically innovative: magnetic bearings and digital rotor speed control allow partial load efficiency levels to be reached that were hither to impossible.

i-FX (1+i) 2602 - 5403

High efficiency chiller, air source for outdoor installation
567 – 1273 kW

Outdoor unit for the production of chilled water with fixed speed and variable speed (Inverter Driven) screw compressors optimized for R134a, axial-flow fans, condensing coil with copper tubes and aluminium fins, shell and tube single pass evaporator designed by Climaveneta and electronic expansion valve. Eurovent certification for all the sizes. Base and supporting structure and panels are of galvanized epoxy powder coated steel. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise temperature control together with the use of inverter technology. The high performance’s level, both full and partial load, is achieved thanks to the accurate unit’s design and to the use of fixed speed motor together with variable speed (inverter) motor.

FX-FC 1502 - 6002

Air cooled chiller with free-cooling
332 – 1450 kW

Outdoor unit for the production of chilled water, equipped with semi-hermetic screw compressors, R134a refrigerant, axial-fans, condensing coil with copper tubes and aluminum fins, shell and tube evaporator single pass and electronic expansion valve. Base, supporting structure and panels are of galvanized epoxy powder coated steel. The unit is supplied with anti-freeze oil and refrigerant and has been factory tested. On-site installation therefore just involves making connections to the mains power and water supplies. The booster, a patent pending solution, allows to achieve high mechanical cooling efficiency. These chillers, fitted with free-cooling coils, are used in IT-cooling, industrial and civil applications, when the cooling load is constant all-year-round or the outdoor air temperature is lower than the temperature of the liquid return line. In free cooling mode, the liquid is cooled by outdoor air, thus lowering the load of the compressors until it is reduced to zero; this occurs already at positive outdoor temperature (T+ versions and SL-T+). The NG configuration complies with applications where it is not allowed or desired the use of ethylene glycol.

FOCS60 /CA 1502 - 6603

Air source chiller for outdoor installation – 60 Hz
310 – 1506 kW

Outdoor unit (voltages available 460V, 380V or 230V) for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-fl ow fans, condensing coil with copper tubes and aluminium fins, single pass shell and tubes evaporator and electronic expansion valve. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Flexible and reliable unit; it easily adapts itself to different thermal load cobdtions thanks to the precise thermoregulation. The high performance’s level is achieved thanks to the accurate sizing of all internal components.

FOCS2/CA 1502 - 6603

High efficiency chiller, air source for outdoor installation
307 – 1543 kW

Outdoor unit for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-flow fans, condensing coil with copper tubes and aluminium fins, single step shell and tubes evaporator designed by Climaveneta and electronic expansion valve. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation. The high performance’s level is achieved thanks to the accurate sizing of all internal components.

TECS-FC 0211 - 1204

High efficiency air cooled chiller with free-cooling
302 – 1693 kW

Outdoor unit for the production of chilled water, equipped with oil-free centrifugal compressors, R134a refrigerant, axial EC fans, condensing coil with copper tubes and aluminum fins, shell and tube flooded evaporator and electronic expansion valve. Base, supporting structure and panels are of galvanized epoxy powder coated steel. The unit is supplied with refrigerant and has been factory tested. On-site installation therefore just involves making connections to the mains power and water supplies. The rotor speed digital control allows an accurate and efficient thermoregulation in every operating condition. The economizer improves the refrigerant circuit efficiency (not present in sizes 0211 and 0452). These chillers, fitted with free-cooling coils, are used in IT-cooling, industrial and civil applications, when the cooling load is constant all-year-round or the outdoor air temperature is lower than the temperature of the liquid return line. In free cooling mode, the liquid is cooled by outdoor air, thus lowering the load of the compressors until it is reduced to zero. The NG configuration complies with applications where it is not allowed or desired the use of ethylene glycol.

FX 1502 - 7223

Chiller, air source for outdoor installation
289 – 1710 kW

Outdoor unit for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-flow fans, micro-channel full-aluminum condensing coils, single-pass shell and tubes evaporator designed by Mitsubishi Electric Hydronics & IT Cooling Systems S.p.A. and electronic expansion valve. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Eurovent certification. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation and the accurate sizing of all internal components. The compressors feature an enhanced lubrication system, an innovative internal geometry and a different control of capacity steps. Innovations that grant a remarkable performance improvement especially at partial loads.

FOCS60 /K 1922 - 7223

Air source chiller for outdoor installation – 60 Hz
429 – 1728 kW

Outdoor unit (voltages available 460V, 380V or 230V) for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-fl ow fans, condensing coil with copper tubes and aluminium fins, single pass shell and tubes evaporator and electronic expansion valve. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Flexible and reliable unit; it easily adapts itself to different thermal load cobdtions thanks to the precise thermoregulation. The high performance’s level is achieved thanks to the accurate sizing of all internal components.

FOCS2/K 1502 - 8404

Chiller, air source for outdoor installation
295 – 1818 kW

Outdoor unit for the production of chilled water with semi-hermetic screw compressors optimized for R134a, axial-flow fans, condensing coil with copper tubes and aluminium fins, single step shell and tubes evaporator and thermostatic expansion valve. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise thermoregulation. This unit has been designed to optimize the costs – performances ratio.